Clear Grip is durable, micronized polymeric aggregate developed for use as an anti-skid additive to floor paint or sealers. Because it’s a lightweight plastic grit, Clear Grip remains suspended longer. It adds a slight texture to the finish without changing colors. It has excellent resistance to chemicals and detergents and helps extend paint life. Clear Grip can be used in water-based, solvent-based alkyd, urethane or epoxy coatings.
DIRECTIONS: While stirring continuously, add up to 100gr of Clear Grip to one US gallon of coating. Follow application instructions on paint or sealer.
– In thinner products, occasional stirring during use may be required to keep grit uniform.
– If applying more than one coat, add Clear Grip to the topcoat only.
– Do not reapply over wet areas.
LIMITATIONS: Clear Grip is not recommended for repellents, silicones or wax-based coatings.
CAUTIONS: Use with adequate ventilation. Use appropriate, properly fitted respiratory protection filter apparatus and avoid breathing dust and particles.
FIRST AID: if you experience dizziness, headache or eye watering, get to fresh air, leave the area. In case of eye contact, flush with large amounts of water. Get medical attention if irritation persists. Do not take internally. If swallowed, get medical attention immediately.
KEEP OUT OF REACH OF CHILDREN.
NOULA GRIP
NON-SLIP GRIT ADDITIVE FOR SEALER, PAINTS & EPOXIES
ADD A MEASURE OF SAFETY TO SLIPPERY STEPS, STAIRS AND WALKWAYS
